Rebrosova E., Joyce M. K., Rebros M., Bazuin B. J., Atashbar M. Z., Fleming P. D., Current Status and Research Needs in Manufacturing of Printed Electronics, MRS Fall Meeting, Nov. 28 – Dec. 2 (2011) Boston, MA – Invited talk.
Narakathu B.B., Reddy A.S.G., Atashbar M.Z., Rebrosova E., Rebros M., Joyce M.K., A Novel Gravure Printed Impedance Based Flexible Electrochemical Sensor, 10th IEEE Sensors Conference, October 28-31, 2011, Limerick, Ireland (Accepted).
Reddy A.S.G., Narakathu B.B., Atashbar M.Z., Rebros M., Rebrosova E., Joyce M.K., Fully Printed Flexible Humidity Sensor, 25th Eurosensors Conference, September 4 - 7, 2011, Athens, Greece (Accepted).
Reddy A.S.G., Narakathu B.B., Atashbar M.Z., Rebros M., Rebrosova E., Joyce M.K., Gravure Printed Electrochemical Biosensors, 25th Eurosensors Conference, September 4 - 7, 2011, Athens, Greece (Accepted).
Reddy A.S.G., Atashbar M.Z., Rebros M., Hrehorova E., Bazuin B., Fleming D., Joyce M. ,Printed capacitive based humidity sensors on flexible substrates, Sensor Letters, 9, pp. 869-871, (2011).
Hrehorova E., Rebros M., Pekarovicova A., Bazuin, B., Ranganathan, A., Garner, S., Merz, G., Tosch, J., Boudreau, B., Gravure Printing of Conductive Inks on Glass Substrates for Applications in Printed Electronics, IEEE Journal of Display Technology, Vol. 7, No. 6, (2011), 318-324
Reddy A.S.G., Narakathu B.B., Atashbar M.Z., Rebros M., Hrehorova E., Joyce M. ,Flexible Electrochemical Biosensor Using Rotogravure Printing, 10th Annual Flexible Electronics and Displays Conference, February 7 - 10, 2011, Phoenix, AZ.
Reddy A.S.G., Narakathu B.B., Atashbar M.Z., Rebros M., Hrehorova E., Joyce M. ,Printed Wireless Humidity Sensors On Flexible Substrates, 10th Annual Flexible Electronics and Displays Conference, February 7 - 10, 2011, Phoenix, AZ.
Alsaid D., Hrehorova E., Joyce M.K., Atashbar M.Z., Rebros M. ,Gravure Printing of ITO-based Transparent Electrodes for Applications in Flexible Electronics, Flextech 10th Annual Flexible Electronics and Displays Conference, February 7 - 10, (2011) Phoenix, AZ.
Reddy A.S.G., Narakathu B.B., Atashbar M.Z., Rebros M., Hrehorova E., Joyce M.,Printed electrochemical based biosensors on flexible substrates, IEEE Sensors Conference, November 1-4, Waikoloa, HI, USA, pp. 1596-1600 (2010).
Avuthu S.G.R., Narakathu B.B., Atashbar M.Z., Rebros M., Hrehorova E., Bazuin B., Fleming D., Joyce M., Printed Capacitive Based Humidity Sensors on Flexible Substrates, 13th International Meeting on Chemical Sensors, July 11-14, 2010, Perth, Australia, pp. 124 (2010).
Hrehorova, E., Rebros, M., Pekarovicova, A., Bazuin, B., Ranganathan, A., Garner, S., Merz, G., Tosch, J., Boudreau, B., Gravure Printing of Conductive Inks on Glass Substrates for Applications in Printed Electronics, 2010 Flexible Electronics & Displays Conference, 1-4 February (2010) Phoenix, AZ
Joyce, M. K., Fleming, P. D., Rebros, M., Hrehorova, E., Stoops, M., Improving of the Electrical Performance of Printed Conductive Layers, 2010 Flexible Electronics & Displays Conference, 1-4 February (2010) Phoenix, AZ
Alsaid D., Joyce M., Hrehorova E., Rebros M., Printability of Conductive Inks for Organic Photovoltaics Fabrication by Gravure Printing, Printed Electronics USA 2009, San Jose, December 2-3 (2009)
Rebros M., Hrehorova E., Bazuin B., Joyce M., Printability, Compatibility and Electrical Performance of Functional Inks Printed on Flexible Substrates, Proc. of TAGA 61th Annual Technical Conference, 15-18 May, 2009, New Orleans, LA
Kattumenu, R., Rebros, M., Joyce, M., Fleming, P.D., Neelgund, G., Effect of Substrate Properties on Conductive Traces Printed with Silver-Based Flexographic Ink, Nord. Pulp Paper Res. J., Vol. 24 (1), 2009, p. 101-106
Joyce M. K., Rebros M., Ramrattan S. N., Adopting More Progressive Refractory Coating Measurement Contrals, Int. J. Metalcasting, Vol. 2, (2008), p.29-39
Hrehorova E., Rebros M., Pekarovicova A., Fleming P. D., Bliznyuk V. N., Characterization of Conductive Polymer Inks based on PEDOT: PSS, TAGA Journal, Vol.4, (2008), p.219-231
Hrehorova E., Rebros M., Pekarovicova A. and Fleming P. D., Suitability of Gravure Printing for High Volume Fabrication of Electronics, IS&T Digital Fabrication 2008, Pittsburgh, PA, September 7-12, 2008
Rebros M., Hrehorova E., Joyce M., Fleming P. D., The Challenges of Printing Functional Materials on Cellulose Based Substrates, IS&T Digital Fabrication 2008, Pittsburgh, PA, September 7-12, 2008.
Pekarovicova A., Hrehorova E., Fleming P. D., Rebros M., Joyce M., “Rotogravure for Printed Electronics,” IARIGAI 35th International Research Conference on Advances in Printing and Media Technology, Valencia, Spain, September 7-10, 2008
Rebros M., Hrehorova E., Bazuin B., Joyce M., Fleming P.D., Pekarovicova A., Rotogravure Printed UHF RFID Antennae Directly on Packaging Material, Proc. of TAGA 60th Annual Technical Conference, 2008, San Francisco, CA
Joyce M. K., Ramrattan S. N., Rebros M., Comparing Alternate Foundry Refractory Coating Measurement Systams, 112th Metalcasting Congress, 17-20 May (2008), Atlanta, GA
Ramrattan S. N., Rebros M., Joyce M. K., Effect of Cast Iron Interfacial Temperatures on a Graphitic Refractory Coating at Various Percent Solids, 112th Metalcasting Congress, 17-20 May (2008), Atlanta, GA
Hrehorova E., Rebros M., Joyce M. K., Pekarovicova A., “Electrifying” the Industry: WMU Reasearches Flexo in Printed Electronics, Flexo Magazine, September (2008), P. 41 -45
Pekarovicova A., Hrehorova E., Joyce M.K., Flemin P.D., Rebros M., Bliznyuk V. and Bazuin B.: Flexo and Gravure Printing of RFID Tags, (Invited lecture), Nanoengineered Inks and Pigments, PIRA Intertech, 2007, Philadelphia, PA
Fleming P. D., Bazuin B, Rebros M., Hrehorova E., Joyce M., Pekarovicova A., Bliznyuk V., Printed Electronics at Western Michigan University, invited paper in Proceedings of the AIChE’s 2007 Annual Meeting, November 4-9, 2007, Salt Lake City, UT
Hrehorova E., Pekarovicova A., Rebros M., Bliznyuk V., N., Fleming P. D., Factors Affecting Sheet Resistivity of Gravure Printed PEDOT:PSS Layers, Poster Presentation at IUMACRO’07, IUPAC and ACS Conference on Macromolecules for a Safe, Sustainable and Healthy World, 2nd Strategic Polymer Symposium, June 10-13, 2007, Brooklyn, NY
Rebros M., Ramrattan S. N., Joyce M. K., Ikonomov P., Behavior of 3D Printed Sand at Elevated Temperature, 111th Metalcasting Congress, 15-18 May (2007), Houston, TX
Cruz M., Joyce M, Fleming P., Rebros M., Pekarovicova A., Surface Topography Contribution To RFID Tag Efficiency Related To Conductivity, 2007 TAPPI Coating & Graphic Arts Conference, 22-25 April, 2007, Miami, FL
Hrehorova E., Rebros M., Pekarovicova A., Fleming P. D., Bliznyuk v. N., Characterization of Conductive Polymer Inks based on PEDOT: PSS, TAGA 59th Annual Technical Conference, 18-21 March, 2007, Pittsburgh, PA
Rebros M., Fleming P. D., Joyce M. K., UV-Inks, Substrates and Wetting, 2006 TAPPI Coating & Graphic Arts Conference, 24-27 April, Atlanta GA (2006)
Rebros M., Jamnicky M., Lokaj J., Kadlecikova M., Weathering of the crystal glass in moist and polluted atmospheres, Ceramics-Silikaty 50 (1) (2006) p.44
Sedlacek J., Galusek D., Rebros M., Sajgalik P., The effect of RE2O3 – SiO2 (RE= Y, La, Yb, Sm, Nd) additives on microstructure evolution and mechanical properties of LPS aluminas, IX Conference & Exhibition of the European Ceramic Society, 19-23 June, 2005, Portoroz, Slovenia
Rebros M., Jamnicky M., Kadlecikova M., Characterization of solid weathering products formed in polluted atmospheres on crystal glass, Glastech. Ber. Glass Sci. Technol. 77C (2004) p.425
Sedlacek J., Rebros M., Jamnicky M., Lokaj J., Influence of the glass composition on the high zirconia fused cast refractory corrosion, Glastech. Ber. Glass Sci. Technol. 77(4) (2004) p.194
Rebros M., Jamnicky M., Pijak I., J. Lokaj, Kadlecikova M., Influence of physical and chemical factors on weathering of crystal glass, Chemicke listy 8 (2003) p.865
Rebros M., Jamnicky M., Pijak I., J. Lokaj, Kadlecikova M., Influence of physical and chemical factors on weathering of crystal glass, 55 th Congress of Chemical Societies, 8-12 September, 2003, Kosice, Slovakia
Rebros M. Jamnicky M., Lokaj J., Kadlecikova M., Influence of the atmosphere’s composition on weathering of crystal glass by cyclic changes of temperature, 5th conference Preparation of Ceramic Materials, 24-27 June, 2003, Herlany, Slovakia
Rebros M., Jamnicky M., Kozankova J., Kadlecikova M., Influence of environment on surface of the table glassware, 5 th International Conference on Solid State Chemistry, 7-12 July, 2002, Bratislava, Slovakia
Petruskova V., Vrabel P., Simurka P., Maryska M., Rebros M., Weathering process of utilitarian glasses at storage, 4 th conference Preparation of Ceramic Materials, 26-28 June, 2001, Herlany, Slovakia
Rebros M., Pach L., Petruskova V., Simurka P., Action of wash-up surfaces of commercial glasses, 4 th conference Preparation of Ceramic Materials, 26-28 June, 2001, Herlany, Slovakia |
