|
|
| |
|
| |
|
2010 -2011 |
A.S.G. Reddy, M.Z. Atashbar, M. Rebros, E. Hrehorova, B. Bazuin, D. Fleming, M. Joyce “Printed capacitive based humidity sensors on flexible substrates” Sensor Letters, 9, pp. 869-871, (2011).
E. Hrehorova, M. Rebros, Pekarovicova, A., Bazuin, B., Ranganathan, A., Garner, S., Merz, G., Tosch, J., Boudreau, B., “Gravure Printing of Conductive Inks on Glass Substrates for Applications in Printed Electronics,” IEEE Journal of Display Technology, Vol. 7, No. 6, (2011), 318-324.
Neelgund, G.M., Bliznyuk, V.N., Pud, A.A., Fatyeyeva, K.Yu, Hrehorova, E., Joyce, M. Formation of nanostructured composites with environmentally-dependent electrical properties based on poly (vinylidene fluoride)-polyaniline core-shell latex system, Polymer, 51, (2010), p. 2000-2006.
E. Rebrosova, M. K. Joyce, M. Rebros, B. J. Bazuin, M. Z. Atashbar, P. D. Fleming, “Current Status and Research Needs in Manufacturing of Printed Electronics,” MRS Fall Meeting, Nov. 28 – Dec. 2 (2011) Boston, MA ; Invited talk.
B.B. Narakathu, A.S.G. Reddy, M.Z. Atashbar, E. Rebrosova, M. Rebros, M.K. Joyce, “A Novel Gravure Printed Impedance Based Flexible Electrochemical Sensor”, 10th IEEE Sensors Conference, October 28-31, 2011, Limerick, Ireland (Accepted).
A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E. Rebrosova, M.K. Joyce, “Fully Printed Flexible Humidity Sensor”, 25th Eurosensors Conference, September 4 - 7, 2011, Athens, Greece (Accepted).
A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E. Rebrosova, M.K. Joyce, “Gravure Printed Electrochemical Biosensors”, 25th Eurosensors Conference, September 4 - 7, 2011, Athens, Greece (Accepted).
E. Rebrosova, “The Expanding Availability of Commercial Materials for Printed Electronics – Online Materials Registry,” SEMICON West – Printed/Flexible Electronics: Beyond R&D to Real Deal Technologies, July 12-14 (2011) San Francisco, CA – Invited Talk.
A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E. Hrehorova, M. Joyce “Flexible Electrochemical Biosensor Using Rotogravure Printing” 10th Annual Flexible Electronics and Displays Conference, February 7 - 10, 2011, Phoenix, AZ.
A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E. Hrehorova, M. Joyce “Printed Wireless Humidity Sensors On Flexible Substrates” 10th Annual Flexible Electronics and Displays Conference, February 7 - 10, 2011, Phoenix, AZ.
D. Alsaid, E. Hrehorova, M.K. Joyce, M.Z. Atashbar, M. Rebros “Gravure Printing of ITO-based Transparent Electrodes for Applications in Flexible Electronics” Flextech 10th Annual Flexible Electronics and Displays Conference, February 7 - 10, (2011) Phoenix, AZ.
A.S.G. Reddy, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E. Hrehorova, M. Joyce "Printed electrochemical based biosensors on flexible substrates" IEEE Sensors Conference, November 1-4, Waikoloa, HI, USA, pp. 1596-1600 (2010).
S.G.R. Avuthu, B.B. Narakathu, M.Z. Atashbar, M. Rebros, E Hrehorova, B. Bazuin, D. Fleming, M. Joyce “Printed Capacitive Based Humidity Sensors on Flexible Substrates” 13th International Meeting on Chemical Sensors, July 11-14, 2010, Perth, Australia, pp. 124 (2010).
Hrehorova, E., Rebros, M., Pekarovicova, A., Bazuin, B., Ranganathan, A., Garner, S., Merz, G., Tosch, J., Boudreau, B., “Gravure Printing of Conductive Inks on Glass Substrates for Applications in Printed Electronics,” 2010 Flexible Electronics & Displays Conference, 1-4 February (2010) Phoenix, AZ.
Joyce, M. K., Fleming, P. D., Rebros, M., Hrehorova, E., Stoops, M., “Improving of the Electrical Performance of Printed Conductive Layers,” 2010 Flexible Electronics & Displays Conference, 1-4 February (2010) Phoenix, AZ.
A.A. Kline, B.M. Aller, and E. Tsang, “Improving Student Retention in STEM Disciplines: A Model That Has Worked,” ASEE 2011 National Meeting, paper AC 2011-1625, Vancouver, BC, Canada, June 26-29, 2011.
K. Warners, B. Richmond, A. Eaton, A. Kline, B. Aller, and E. Tsang, “Rapid Manufacturing of a Hands-on Learning Device,” ASEE 2010 National Meeting, paper AC 2010-1441, Louisville, KY, June 20-23, 2010.
Websites for Ongoing Projects
STEP Bridges to Success in CEAS, Summer Math Program, originated February, 2011, http://www.wmich.edu/step/summer.php
Scholarships for Science Technology Engineering and Mathematics, S-STEM, originated April 2010, <http://www.wmich.edu/engineer/sstem/index.html>
WMU Michigan-Louis Stokes Alliance for Minority Participation MI-LSAMP), originated summer 2007, <http://www.wmich.edu/engineer/lsamp/ >
External Funding at WMU as a Principal Investigator
"Increasing Opportunities and Improving Outcomes for Undergraduate Students in Engineering and Applied Sciences," A.A. Kline (PI), I. Abdel-Qader, B.M. Aller, and E. Tsang. Funded by NSF S-STEM Program, Funds Awarded: $656,159. Project Period: March 1, 2010 - February 28, 2015.
External Funding at WMU as a Program Manager with Budgetary Control
"Meeting the Challenge: the Michigan Louis Stokes Alliance for Minority Participation," M.S. Coleman, L. Thompson, E. Tsang and many others. E. Tsang, co-PI, WMU, A. Kline, Program Manager. Funds: $3,500,000. Project Period: September 1, 2010 – August 31, 2015. $600,000 to WMU.
“STEP Bridges Math Program,” as part of the NSF-STEP Program grant, July 2010 and 2011. Coordinate faculty, instructors, and student assistants for 3-week math intensive pre-freshman year preparation program, $7,500 per year.
"Louis Stokes Alliance for Minority Participation (LSAMP)," WMU Program Manager, May, 2008 - October, 2010. Funded by NSF through consortium with University of Michigan, Michigan State University, Wayne State University, and Western Michigan University. E. Tsang, co-PI, WMU, A. Kline, Program Manager. $600,000 to WMU.
Alvaro Buitrago, Paul D. Fleming III, John Cameron and Jan Pekarovic, “Assessment of INGEDE Method in Different Laboratories and Protocol Modifications”, Proceedings of 63rd Annual Technical Conference, Pittsburgh, March 6-9, 2011.
Alvaro Buitrago, Jan Pekarovic, John Cameron, and Paul D. Fleming III, “Assessment of INGEDE Method in Different Laboratories and Protocol Modifications”, Proceedings of the 241st ACS Spring Meeting in Anaheim, California (March 27-31, 2011).
John Cameron, INGEDE Method 11 applied at Western Michigan University, Round Table on Deinking of Digital Prints, Perlen Paper AG, Switzerland February 15, 2011
Young, B.R., T.L. Young, M.K. Joyce, S.I. Kennedy, M.A. Atashbar, “Future Opportunities for Advancing Glucose Test Device Electronics”, J. Diabetes Science and Technology, accepted for publication in Glucose Electrochemistry Symposium Volume 5:5, September, 2011. |
2009 -2010 |
W.W. Liou, Y. Peng, P. Parker. ”Analytical modeling of capillary flow in tubes of nonuniform cross section". J. Colloid & Interf. Sci. 333(2009) 389.
Peng, Y, W. W. Liou, P. Parker. Analytical Investigation of Free Surface Flow in Multi-Layer Porous. J. Colloid & Interface Science Submitted
Pekarovic M., Pekarovic J.,and Cameron, J. , "Autohydrolysis of Biomass with the Aid of Glycerol", 1st International Conference May 18-20, 2010
Nural Yilgor; John Cameron; Anjan Velpumadugu; and Kundan Kumar "Enzymatic Deinking of Inkjet Printed Papers", 2009 TAPPI Engineering, Pulping, Environmental Conference, Memphis Tenn. (Oct 11 -14th, 2009
Dewei Qi, Yingming Liu, Wei Shyy and Hikaru Aono, “Simulations of dynamics of plunge and pitch of a 3D flexible wing in a low Reynolds number flow”, Physics of Fluids, Phys. 22, 091901 (2010); doi:10.1063/1.3481786 (20 pages).
H. Aono , A. Gupta, D. Qi, and W. Shyy, ”The Lattice Boltzmann Method for Flapping Wing Aerodynamics”, AIAA-2010-4867. http://www.aiaa.org/agenda.cfm?dateget=all).
Qi, Li, Dewei Qi, Lynne Dykstra, Margaret K Joyce, Paul D. Flemming III, Pnina Ari-Gur “The Photocatalytic Paper with coating formulations of Titanium Dioxide and Natural Zeolite” Conference CD, PAPERCON, Atlanta, May 2-6, 2010. (http://www.tappi.org/content/press/papercd-10toc.pdf)
K. Warners, B. Richmond, A. Eaton, A. Kline, B. Aller, and E. Tsang, “Rapid Manufacturing of a Hands-on Learning Device,” ASEE 2010 National Meeting, paper AC 2010-1441, Louisville, KY, June 20-23, 2010.
Peer Reviewed Articles and Conference Proceedings or Invited Papers
Ramesh Kattumenu, Marian Rebros, Margaret Joyce, Paul D. Fleming and Gururaj Neelgund, “Effect of Substrate properties on Conductive Traces Printed With Silver-Based Flexographic Ink”, NPPRJ, 2009, 24, p.101-106.
Sindphale V., Pekarovicova A., Fleming P. D.: Sustainable Green Inks for Flexo: Development and Printability Study, Flexo Magazine, September 2009, 64-65.
Alexandra Pekarovicova, Veronika Lovell, Yu Ju Wu, Paul D. Fleming, and Bill Guillot, “Rotogravure Spot Color Proofing for Decorative Laminates using SmartColour iVue Software,” IARIGAI 36th International Research Conference on Advances in Printing and Media Technology, Stockholm, Sweden, September 6-9, (2009).
Seonghyuk Ko, Pnina Ari-Gur, Margaret Joyce and Paul D. Fleming, “High performance nano titania photocatalytic paper composite. Part II: Preparation and characterization of natural zeolite-based nano titania composite sheets and study of their photocatalytic activity”, Materials Science and Engineering B, 164 (2009) 135–139.
Seonghyuk Ko, Jan Pekarovic, Paul D. Fleming and Pnina Ari Gur, “High performance nano titania photocatalytic paper composite. Part I: Experimental design study for TiO2 composite sheet using a natural zeolite microparticle system and its photocatalytic property”, Materials Science and Engineering B, 166 (2010) 127-131.
Qi Li, Kelsey Lynne Dykstra, Paul D. Fleming III, Margaret K Joyce, Dewei Qi and Pnina Ari-Gur, “The Photocatalytic Paper with Coating Formulations of Titanium Dioxide and Natural Zeolite”, Proceedings of PaperCon2010, Atlanta, May 2 - 5, 2010.
Sinan Sonmez, Paul D. Fleming, Margaret K. Joyce and Oznur Ozden, “Effects of Coat Weight and Pigment Selection on Flexographic Printability of Coated Test Liners”, Proceedings of PaperCon2010, Atlanta, May 2 - 5, 2010.
Pekarovicova A., Lovell V., Sangmule S. L., Fleming P. D. III and Pietrack T., “Overprinting of Spot Colors for Flexo Packaging,” IARIGAI 37th International Research Conference on Advances in Printing and Media Technology, Montreal, Quebec, Canada, September 12-15, (2010).
Sinan Sonmez, Emre Dolen, Paul D. Fleming, “Binder Effects on the Creaseability of Pigment Coated Paperboard”, Asian Journal of Chemistry, Volume 23 (2011).
Not Refereed Conference Proceedings
Reem El Asaleh, Paul D. Fleming III and Alexandra Pekarovicova, “Disassembling of Composite Images”, Proceedings of NIP25, Louisville, September 20-24, 2009.
Reem El Asaleh, Sinan Sonmez, Paul D. Fleming III and Alexandra Pekarovicova, “Customized ICC Display Profile Construction and Concerns”, Proceedings of TAGA 2010, March San Diego.
Awadhoot Shendye, Paul D. Fleming III, and Alexandra Pekarovicova, “Metamerism, Color Inconstancy and Chromatic Adaptation for Spot Color Printing”, Proceedings of TAGA 2010, March San Diego.
Sangmeshwar. L. Sangmule, Veronika Lovell, Alexandra Pekarovicova, Paul D. Fleming, “Digital Proofing of Spot Colors for Flexo Packaging”, Proceedings of TAGA 2010, March San Diego.
Roland Gong, Sinan Sonmez and Paul D. Fleming III, “Application of Nano Pigments in Inkjet Paper Coating”, Proceedings of NIP 26, Austin, Sept. 2010.
Paul D. Fleming, Margaret K. Joyce, Marian Rebros, Dania Al-Said, Erika Hrehorova, and Matthew Stoops. “Development of In-Line Printing Press Calendering Station”, Proceedings of NIP 26, Austin, Sept. 2010
.Reem El Asaleh and Paul D. Fleming III, “Printed Electronics and E-paper”, Proceedings of DF 2010, Austin, Sept. 2010.
CAPE publications
Reddy, A. S. G., Narakathu, B. B., Atashbar, M.Z., Rebros, M., Hrehorova, E., Joyce, M.,” Printed Wireless Humidity Sensors On Flexible Substrates,” 2011 FLEX, Flexible Electronics & Displays Conference, 7-10 February, 2010, Phoenix, AZ (submitted)
Reddy, A. S. G., Narakathu, B. B., Atashbar, M.Z., Rebros, M., Hrehorova, E., Joyce, M.,” Flexible Electrochemical Biosensor Using Rotogravure Printing,” 2011 FLEX, Flexible Electronics & Displays Conference, 7-10 February, 2011, Phoenix, AZ (submitted)
Alsaid, D., Hrehorova, E., Joyce, M. K., Atashbar, M. Z, Rebros, M., “Gravure Printing of ITO-based Transparent Electrodes for Applications in Flexible Electronics,”2011 FLEX, Flexible Electronics & Displays Conference, 7-10 February, 2011, Phoenix, AZ (submitted)
Rebros, M., Hrehorova, E., Bazuin, B., Ranganathan, A., Pekarovicova, A., Garner, S., Merz, G., Tosch, J., Boudreau, R., Miller, J., Lyon, J.,“Gravure Printing of Sub-100 µm Conductive Features on Glass Substrate,”2011 FLEX, Flexible Electronics & Displays Conference, 7-10 February, 2011, Phoenix, AZ (submitted)
Avuthu,S.G.R., Atashbar,M.Z., Rebros,M., Hrehorova,E., Bazuin,B., FlemingD., Joyce, M.“Printed Capacitive Based Humidity Sensors on Flexible Substrates” Sensor Letters (conditionally accepted)
Neelgund,G. M., Bliznyuk,V. N., Pud,A. A., Fatyeyeva,K.Y., Hrehorova,E., Joyce,M., “Demonstration of highly-sensitive amperometric ammonia sensor based on poly(vinylidene fluoride) - polyaniline core-shell nanoparticle system” Polymer (accepted for publication)
Kattumenu,R., Joyce,M., Hrehorova,E., Fleming,P.D., “Investigation of Paper Substrates for Printed RFID Applications”, accepted PIRA, in press.
Hrehorova, E., Rebros, M., Pekarovicova, A., Bazuin, B., Ranganathan, A., Garner, S., Merz, G., Tosch, J., Boudreau, R., “Gravure Printing of Conductive Inks on Glass Substrates for Applications in Printed Electronics,” IEEE Journal of Display Technology (accepted for publication)
Kattumenu,R., Joyce,M., Rebros,M., Fleming,P.D., “Substrate Influence on the Performance of Water-based Flexo Printed Antenna “,TAGA Journal of Graphic Technology(conditionally accepted).
Reddy,A. S. G., Narakathu,B.B., Atashbar,M.Z., Rebros,M., Hrehorova,E., Joyce,M., "Printed electrochemical based biosensors on flexible substrates" IEEE Sensors Conference, November 1-4, 2010 - Waikoloa, HI, USA. (in print).
Avuthu,S. G. R., Atashbar,M.Z., Rebros,M., Hrehorova,E, Bazuin,B., Fleming,D., Joyce,M., “Printed Capacitive Based Humidity Sensors on Flexible Substrates” 13th International Meeting on Chemical Sensors, July 11-14, 2010, Perth, Australia, pp. 124 (2010).
Joyce, M. K., Fleming, P. D., Rebros, M., Hrehorova, E., Stoops, M., “Improving of the Electrical Performance of Printed Conductive Layers,” 2010 Flexible Electronics & Displays Conference, 1-4 February, 2010, Phoenix, AZ
Alsaid, D., Joyce, M., Hrehorova, E., Rebros, M., “Printability of Conductive Inks for Organic Photovoltaics Fabrication by Gravure Printing,” Poster presentation at Printed Electronics USA 2009, December 1-4, San Jose, CA |
2008 -2009 |
Referred Journal
Dania Alsaid, and John Cameron, “Gas Fried High Temperature Drying of Paper, Accepted for publication in TAPPI 2008
Alkhasawneh, H., Cameron J., AbuBakr S., “The Effect of Fractionation on the Drying Behavior of Recycled Fibers”, Progress in Paper Recycling, Vol. 16, No. 2, (February 2007)
Referred Conference Proceedings
John H. Cameron, Nural Yilgor, and Jan Pekarovic; “Fate of Silver from Recycling of Radio Frequency ID Tag”, TAPPI Engineering, Pulping Environmental Conference, Portland, Or Aug (2008).
Peer Reviewed Articles and Conference Proceedings or Invited Papers
Yu Ju Wu, Alexandra Pekarovicova and Paul D. Fleming, “The Effect of Paper Properties on the Color Reproduction for Digital Proofing of Gravure Publication Printing”, TAGA Journal, 4(2), 72-83 (2008).
Renmei Xu, Yu Ju Wu, Alexandra Pekarovicova, Paul D. Fleming and Michelle X. Wang, “The Effects of paper Coating on Gravure Ink Mileage”, TAGA J. 4, 119 (2008).
Erika Hrehorova, Marian Rebros, Alexandra Pekarovicova, Paul D. Fleming, and Valery N. Bliznyuk, “Characterization of Conductive Polymer Inks based on PEDOT:PSS”, TAGA J. 4, 219 (2008)
Pekarovicova, A., Hrehorova, E., Fleming, P. D., Rebros, M., Joyce, M. K., “Rotogravure for Printed Electronics,” IARIGAI 35th International Research Conference on Advances in Printing and Media Technology, Valencia, Spain, September 7-10, (2008)
Yu-Ju Wu, Miro Suchy, Paul D. Fleming III and Alexandra Pekarovicova, ”Quality Analysis of Spot Color Reproduction with Inkjet Printers”, JIST, November-December, 2008, Vol. 52 (6).
Peeyush Tripathi, Margaret Joyce, Paul D. Fleming and Masahiro Sugihara, “A Statistical Study of Process Variables to Optimize a High Speed Curtain Coater-Part I”, TAPPI J., January 2009, pp20-26.
Peeyush Tripathi, Margaret Joyce, Paul D. Fleming and Masahiro Sugihara, “A Statistical Study of Process Variables to Optimize a High Speed Curtain Coater-Part II”, TAPPI J., February 2009, pp29-32.
V. Chovancova-Lovell and P. D. Fleming III, “Color Gamut – New Tool in the Pressroom?”, TAPPI J, February 2009, pp4-11.
Hemant Bohra, Paul D. Fleming III and Margaret K. Joyce, “Surface Energy of Coated Paper: Effect of Calendering Conditions and Relative Humidity”, Proceedings of the TAPPI Coating and Graphic Conference, St. Louis, May 31, June 3, 2009.
Takanori Otsuhata, Paul D. Fleming, Margaret K. Joyce, “Investigation into the Coating Layer Requirements for Compatibility with Multiple Inkjet Ink Sets”, Proceedings of the TAPPI Coating and Graphic Conference, St. Louis, May 31, June 3, 2009.
Ramesh Kattumenu, Marian Rebros, Margaret Joyce, Paul D. Fleming and Gururaj Neelgund, “Effect of Substrate properties on Conductive Traces Printed With Silver-Based Flexographic Ink”, NPPRJ, 2009, 24, p.101-106.
Alexandra Pekarovicova, Veronika Lovell, Yu Ju Wu, Paul D. Fleming, and Bill Guillot, “Rotogravure Spot Color Proofing for Decorative Laminates using SmartColour iVue Software,” IARIGAI 36th International Research Conference on Advances in Printing and Media Technology, Stockholm, Sweden, September 6-9, (2009)
Seonghyuk KO, Pnina Ari-Gur, Margaret Joyce and Paul D. Fleming, “High performance nano titania photocatalytic paper composite. Part II: Preparation and characterization of natural zeolite-based nano titania composite sheets and study of their photocatalytic activity”, Materials Science and Engineering B, in press.
Seonghyuk Ko, Jan Pekarovic, Paul D. Fleming and Pnina Ari Gur, “High performance nano titania photocatalytic paper composite. Part I: Experimental design study for TiO2 composite sheet using a natural zeolite microparticle system and its photocatalytic property”, revised for Materials Science and Engineering B.
Paul D. Fleming, Veronika Chovancova, Reem El Asaleh and Laura Bronczyk, Introduction to Page Layout; Featuring Exercises from PageMaker, InDesign and QuarkXPress, Textbook offered by PCI Print Lab.
A. Eaton, J. Cook, B. Richmond, K. Warners, A. Kline, B. Aller, E. Tsang, "Design and Manufacturing of a Hands-on Apparatus for the Display of the Properties of Light," ASEE North Central Section regional conference proceedings, April 3-4, 2009, Grand Valley State University, Grand Rapids, MI.
A.A. Kline, B.M. Aller, and E. Tsang, “First-Year Design and Beyond: A Sequence of Service-Learning Design Courses to Build Student's Professional Skills,” INNOVATIONS 2008: World Innovations in Engineering Education and Research, International Network for Engineering Education and Research (iNEER), Special Volume, Fall 2008, pp. 323-342.
Presentations (underline denotes presenter)
A. Eaton, J. Cook, B. Richmond, K. Warners, A. Kline, B. Aller, E. Tsang, "Design and Manufacturing of a Hands-on Apparatus for the Display of the Properties of Light," ASEE North Central Section regional conference proceedings, April 3 4, 2009, Grand Valley State University, Grand Rapids, MI.
Analytical modeling of capillary flow in tubes of nonuniform cross section
Journal of Colloid and Interface Science, Volume 333, Issue 1, 1 May 2009, Pages 389-399 William W. Liou, Yongqing Peng, Peter E. Parker
Reem El Asaleh, Paul D. Fleming III, Alexandra Pekarovicova, “Disassembling of Composite Images,” IS&T 25th International Conference on Digital Printing Technologies, Louisville, KY, September 20-24, 2009
Roland Gong, ElizabethYuan, Paul D. Fleming, Margaret Joyce, Erika Hrehorova, “Application of Polyolefin Dispersions in Paper Coatings,” IS&T 25th International Conference on Digital Printing Technologies, Louisville, KY, September 20-24, 2009
E. Hrehorova, M. Rebros, A. Pekarovicova and P. D. Fleming, "Suitability of Gravure Printing for High Volume Fabrication of Electronics," IS&T Digital Fabrication 2008, Pittsburgh, PA, September 7-12, 2008
M. Rebros, and E. Hrehorova, M. Joyce, P. D. Fleming, "The Challenges of Printing Functional Materials on Cellulose Based Substrates," IS&T Digital Fabrication 2008, Pittsburgh, PA, September 7-12, 2008
Conductive Polymer Inks based on PEDOT: PSS," TAGA Journal, Vol.4, p.219-231, 2008
G. M. Neelgund, E. Hrehorova, M. Joyce, and V. Bliznyuk, "Synthesis and characterization of polyanaline derivative and silver nanoparticle composites," Polymer International, 57, p.1083-1089, 2008 |
2007 -2008 |
| |
The Pulp and Paper Technology Advanced Workforce Training and Education Series. Volume II, Chapter 5: Pressing and Drying. AbuBakr, S., Alkhasawneh, H. (2007).
The Pulp and Paper Technology Advanced Workforce Training and Education Series. Volume II. Chapter 6B: Coating Operations. AbuBakr, S., Alkhasawneh, H. (2007).
Gururaj M Neelgund, Erika Hrehorova, Margaret Joyce, and Valery Bliznyuk, “Synthesis and characterization of polyanaline derivative and silver nanoparticle composites,” TAPPI Nanotechnology Conference, June 25th, 2008, St. Louis, MS.
G. Neelgund, M. Joyce, V. Bliznyuk, E. Hrehorova, M. Rebros, A. Pekarovicova, P. D. Fleming, V. N. Bliznyuk, “Characterization of Conductive Polymer Inks based on PEDOT: PSS”, TAGA Journal, Vol.4, p.219-231
Gururaj M Neelgund, Erika Hrehorova, Margaret Joyce, and Valery Bliznyuk, “Synthesis and characterization of polyanaline derivative and silver nanoparticle composites,” in press- Polymer International May 2008
Seonghyuk Ko, Margaret K. Joyce and Paul D. Fleming, “Optimization of Optical Properties and Photocatalytic Activity of Polycrystalline TiO2 Nanoparticles Toward Photocatalytic Paper, submitted to Nature Nanotechnology.
Ramesh Kattumenu, Marian Rebros, Erika Hrehorova, Paul D. Fleming, Margaret Joyce, Bradley J. Bazuin, Alexandra Pekarovicova and Gururaj Neelgund, "Evaluation of Flexographically Printed Conductive Traces on Paper Substrates", TAGA Proceedings, San Francisco, 16-19 March, 2008.
R. Kattumenu, M. Joyce, M. Rebro, P.D., Fleming, “Substrate Influence on the Performance of Water-based Flexo Printed Antenna “, submitted to TAGA Journal
R. Kattumenu, M. Joyce, G. Neelgund, P.D Fleming, “Evaluation of Flexographic Conductive Inks for Printed Traces on Paper Substrates”, submitted to Journal of Electronic Materials.
R. Kattumenu, M. Joyce, E. Hrehorova, P.D. Fleming, “Investigation of Paper Substrates for Printed RFID Applications”, submitted to TAPPI Journal.
E. Hrehorova, A. Pekarovicova, P. D. Fleming, “Evaluation of Gravure Printing for Printed Electronics,” TAGA 60th Annual Technical Conference, San Francisco, CA, 16-19 March, 2008
E. Hrehorova, A. Pekarovicova, M. Rebros, V. N. Bliznyuk, P. D. Fleming, Factors Affecting Sheet Resistivity of Gravure Printed PEDOT:PSS Layers, IUMACRO’07, IUPAC and ACS Conference on Macromolecules for a Safe, Sustainable and Healthy World, 2nd Strategic Polymer Symposium, June 10-13, 2007, Brooklyn, NY
E. Hrehorova, V. N. Bliznyuk, A. A. Pud, V. V. Shevchenko, K. Y. Fatyeyeva, Nonlinear Electrical Properties and Fractal Behavior of Polyurethane Elastomer/Polyaniline Composites under Mechanical Deformation, Polymer 48 (2007) 4429-4438
Paul D. Fleming III, Bradley Bazuin, Marian Rebros, Erika Hrehorova,
Margaret K. Joyce, Alexandra Pekarovicova, and Valery Bliznyuk, “Printed
Electronics at Western Michigan University”, invited paper in
Proceedings of the AIChE’s 2007 Annual Meeting, Salt Lake City, 4-9 November 2007.
Erika Hrehorova, Margaret Joyce and Paul D. Fleming III, “Silver-Based
Inks for RFID Antennae Printing - Rheological Behavior and its
Correlation to Printability,” in preparation for Dispersion Science and Technology.
Erika Hrehorova, Alexandra Pekarovicova, V.N. Bliznyuk, and Paul D.
Fleming, “Polymeric Materials for Printed Electronics and Their
Interactions with Paper Substrates,” Proceedings of IS&T Digital
Fabrication 2007, Anchorage, 16-21 September 2007.
Peer Reviewed Articles and Conference Proceedings or Invited Papers
Veronika Chovancova-Lovell, Paul D. Fleming III, Ben Starr and Abhay Sharma, “Side by Side Soft Proofing with CRT and LCD Monitors”, TAGA J., 3, 144, 2007.
Peeyush Tripathi, Margaret Joyce, Do Ik Lee, Paul D. Fleming and Masahiro Sugihara, “Comparison of the Surface and Print Quality of Curtain and Blade Coated Papers”, TAGA Journal VOL. 3, 2003-2013 (2007).
Paul D. Fleming III, Bradley Bazuin, Marian Rebros, Erika Hrehorova, Margaret K. Joyce, Alexandra Pekarovicova, and Valery Bliznyuk, “Printed Electronics at Western Michigan University”, invited paper in Proceedings of the AIChE’s 2007 Annual Meeting, November 4-9, 2007, Salt Lake City.
Renmei Xu, Alexandra Pekarovicova, Paul D. Fleming, and Valery Bliznyuk, “Physical Properties of LWC Papers and Gravure Ink Mileage”, TAPPI J., December 2007 p 27.
V. Chovancova-Lovell and P. D. Fleming III, “Color Gamut – New Tool in the Pressroom?”, TAPPI J, 2008 in press.
Yu Ju Wu, Alexandra Pekarovicova and Paul D. Fleming, “The Effect of Paper Properties on the Color Reproduction for Digital Proofing of Gravure Publication Printing”, TAGA Journal, 4(2), 72-83.2008.
Peeyush Tripathi, Margaret Joyce, Paul D. Fleming and Masahiro Sugihara, “A Statistical Study of Process Variables to Optimize a High Speed Curtain Coater-Part I”, TAPPI J., in press.
Peeyush Tripathi, Margaret Joyce, Paul D. Fleming and Masahiro Sugihara, “A Statistical Study of Process Variables to Optimize a High Speed Curtain Coater-Part II”, TAPPI J., in press.
Yu-Ju Wu, Miro Suchy, Paul D. Fleming III and Alexandra Pekarovicova, ”Quality Analysis of Spot Color Reproduction with Inkjet Printers”, JIST, in press.
Lokendra Pal, Margaret K. Joyce, Paul D. Fleming, Stéphanie A. Cretté and Charles Ruffner, “High Barrier Sustainable Co-Polymerized Coatings”, submitted to Journal of Coating Technology Research.
Erika Hrehorova, Marian Rebros, Alexandra Pekarovicova, Paul D. Fleming, and Valery N. Bliznyuk, “Characterization of Conductive Polymer Inks based on PEDOT:PSS”, TAGA J., 4, 219 (2008).
Renmei Xu, Yu Ju Wu, Alexandra Pekarovicova, Paul D. Fleming and Michelle X. Wang, “The Effects of paper Coating on Gravure Ink Mileage”, TAGA J., 4, 117 (2008).
Erika Hrehorova, Alexandra Pekarovicova, V.N. Bliznyuk, and Paul D. Fleming, “Polymeric Materials for Printed Electronics and Their Interactions with Paper Substrates”, Presented at the IS&T Digital Fabrication 2007, Anchorage, September 16-21, 2007.
Laura Kraft, Kate Blout, and Paul D. Fleming III, “Process Color Profiling: Syncing a Digital Press with an Offset Press”, Presented at the IS&T NIP22: International Conference on Digital Printing Technologies, Anchorage, September 16-21, 2007.
Yu-Ju Wu, Paul D. Fleming III and Alexandra Pekarovicova, “Color Matching Capability of Digital Printers”, Presented at the IS&T NIP22: International Conference on Digital Printing Technologies, Anchorage, September 16-21, 2007.
Steven D. Rice and Paul D. Fleming III, “Lightfastness Properties of Different Digital Printers and Papers”, Presented at the IS&T NIP22: International Conference on Digital Printing Technologies, Anchorage, September 16-21, 2007.
Lokendra Pal, Sachin Agate and Paul D. Fleming, “Effects of Paper Manufacturing Factors on Inkjet Print Quality and Lightfastness”, Presented at the IS&T NIP22: International Conference on Digital Printing Technologies, Anchorage, September 16-21, 2007.
Reem El Asaleh and Paul D. Fleming III, “Cross Platforms Display Calibration and Profiling (MacOs and Windows)”, Presented at the IS&T NIP22: International Conference on Digital Printing Technologies, Anchorage, September 16-21, 2007.
Paul D. Fleming III, Erika Hrehorova, Margaret K. Joyce, Alexandra Pekarovicova, Marian Rebros, Valery Bliznyuk and Bradley Bazuin, “Printed Electronics at Western Michigan University”, invited paper in at the AIChE's 2007 Annual Meeting, November 4-9, 2007, Salt Lake City.
Yu Ju Wu, Veronika Lovell, Alexandra Pekarovicova, Paul D. Fleming, and Margaret Joyce, “Color Capability of Inkjet Coating”, TAGA Proceedings, San Francisco, March 2008.
Ramesh Kattumenu, Marian Rebros, Erika Hrehorova, Paul D. Fleming, Margaret Joyce, Bradley J. Bazuin, Alexandra Pekarovicova and Gururaj Neelgund, "Evaluation of Flexographically Printed Conductive Traces on Paper Substrates", TAGA Proceedings, San Francisco, March 2008.
Erika Hrehorova, Alexandra Pekarovicova, and Paul D. Fleming, “Evaluation of Gravure Printing for Printed Electronics”, TAGA Proceedings, San Francisco, March 2008.
Marian Rebros, Erika Hrehorova, Bradley J. Bazuin, Margaret K. Joyce, Paul D. Fleming, Alexandra Pekarovicova, “Rotogravure Printed UHF RFID Antennae Directly on Packaging Materials”, TAGA Proceedings, San Francisco, March 2008.
Reem El Asaleh and Paul D. Fleming III, “Cross Platforms Display Calibration and Profiling (Mac Os and Windows)”, Presented at The 2nd International Conference on Knowledge Generation, Communication and Management: KGCM 2008 June 29th - July 2nd, 2008 – Orlando.
D. Moseley, N. Tate, A.A. Kline, and B.M. Aller, “Introducing STEM Concepts to Middle-school Students through Interactive Learning,” ASEE North Central Section regional conference proceedings, March 28-29, 2008, Wright State University, Dayton, OH.
A. Eaton, B. Richmond, K. Warners, J. Cook, E. Tsang, B.M. Aller, and A.A. Kline, “Designing and Utilizing an Apparatus to Study the Ray Properties of Light,” ASEE North Central Section regional conference proceedings, March 28-29, 2008, Wright State University, Dayton, OH.
A.C. Hyder, B.M. Aller, and A.A. Kline, “Using Global Positioning Systems (GPS) to Involve Students in Science and Technology,” ASEE North Central Section regional conference proceedings, March 28-29, 2008, Wright State University, Dayton, OH.
T. Place, B.M. Aller, E. Tsang, A.A. Kline, F. Severance, and T. Moon, “Evaluating and Improving Lifelong Learning and Career Awareness in a First-Year Learning Community,” Proceedings of the Frontiers in Engineering Conference, paper 1527, Milwaukee, WI, October, 2007.
Dania Alsaid, Hussam Alkhasawneh and John Cameron, "Effect of
High Temperature Drying of Recycled Paper on Heat Transfer Rates and
Sheet Properties", 8th Annual Symposium on Recycling, Niagara Falls,
Ontario, (Sept 23-27, 2007).
Pekarovicova A., Pekarovic J.: “Disruptive Technologies in Pigment and Ink Industries, PIRA Int., April 2008, book
Pekarovic J., Kumar V., Fleming III P.D., Pekarovic M.: Process Variables of pulp Alkali Treatment. Proceedings, PaperCon ’08, TAPPI/PIMA Conference, Dallas, TX, May 4-7, 2008
Pekarovic J., Pekarovicova A., Fleming III P.D.: Preparation of Biosilica- enriched Filler and an Example of its Use in Papermaking Retention System (Priprava biokremikom obohateneho plnidla a jeho pouzitie v papierenskom retencnom
systeme), Papir a Celuloza, in press (2008)
V.N.Bliznyuk, S,Singamaneni, Polymer Carbon Nanotube Composites, Review Chapter for Encyclopedia of Nanoscience and Nanotechnology to be published by American Scientific Publishing, Edited by H.S. Nalwa. 2008 in press
V.N.Bliznyuk, T.A.Tereshchenko, M.A.Gumenna, Yu.P.Gomza, A.V.Shevchuk, N.S.Klimenko, V.V.Shevchenko, Structure of Segmented Poly(ether urethane)s Containing Amino and Hydroxyl Functionalized Polyhedral Oligomeric Silsesquioxanes (POSS), Polymer 2008, 49, 2298-2305
S. Kandasamy, M. Ghantasala, A. Holland, Y.X. Li, V. Bliznyuk, W. Wlodarski, A. Mitchell, Heat treatment effects on the formation of lanthanum-modified lead zirconate titanate thin films, Materials Letters 62 (2008) 370-373.
E. Hrehorova, V. N. Bliznyuk, A. A. Pud, V. V. Shevchenko, K. Y. Fatyeyeva, Nonlinear Electrical Properties and Fractal Behavior of Polyurethane Elastomer/Polyaniline Composites under Mechanical Deformation, Polymer 48 (2007) 4429-4438
V.N. Bliznyuk, Y.S. Lipatov, N. Ozdemir, T.T. Todosijchuk, V.N. Chornaya, S. Singamaneni, Atomic force and ultrasonic force microscopy investigation of adsorbed layers formed by two incompatible polymers polystyrene and poly(butyl methacrylate), Langmuir 23 (2007) 12973-12983.
|
| |
|
|
|
